If you are the type that likes the freedom that comes with fixing your own car issues, then these are the best high car ramps for you! Steel floors and carjacks are great, but they do not allow you the mobility and other aspects that a ramp gives you. Because of this, we have selected a few ramps among a vast variety that we have decided are the best of the best. Our selection is based on the opinion of customers just like you, their key features, pros and cons, and of course, the height of each ramp.
We also take into account the measurements and materials. As each of us has different types of requirements, it is best that we provide you with a list full of variety for any need that you may encounter. Without further ado, here is our top selection:
Top Best High Car Ramps:
|Race Ramps RR-56-2||Check On Amazon|
|ace Ramps RR-40 Service Sports Ramps||Check On Amazon|
|Trailer-Aid Tandem Tire Changing Rampl||Check On Amazon|
|RhinoGear RhinoRamps||Check On Amazon|
|RhinoGear RhinoRamps Vehicle Ramp||Check On Amazon|
|Camco Yellow Drive On Tri-Leveler||Check On Amazon|
|Scepter Plastic Automotive Rampl||Check On Amazon|
|Tomioka Racing Super Slopes - Car Ramps||Check On Amazon|
|Blendtec Total Classic Original||Check On Amazon
|Pyle Heavy Duty Plastic Curb Ramps||Check On Amazon
1. Race Ramps RR-56-2
This is one of the best car ramps for small or medium-sized vehicles. It features a sturdy construction that is capable enough to lift up to 6,000 pounds together. The key to holding such a heavyweight lies in its solid core. A bonus to this ramp is the lightweight load of the material. The weight of it makes it unproblematic and easy to store or carry when moving.
- Reduced angle of 10.8 degrees
Sample Customer Review. . . I love these ramps! I previously had the generic Walmart ramps that were quite a few years old, the problem was that there was nothing on them to grip the ground and thus they loved to shoot out from under the wheels when driving up.
These race ramps are nice and sticky, I’ve used them on my concrete garage floor and the asphalt driveway and they are solid. I bought them for my Focus RS and use them for oil changes and recently did an intercooler/downpipe install – they worked perfectly and gave me ample room underneath. I also used them with a lowered mustang, which scraped on the cheapie ramps, the race ramps allow lowered cars to use them since they’re so long.
Lastly, the two-piece ramps are nice in that once your car is up, you can remove the ramp extensions to have additional access from the side.
2. Race Ramps RR-40 Service Sports Ramps
This ramp trumps all over its simplicity and ability to do the work without unnecessary steps or designs. This product is perfect for sports cars, as it was designed for that type of vehicle.
The inclination is smooth enough to help you raise your car without trouble at all. It can be used for tires as wide as 9 inches and will lift the car up to 7 inches high. Solid and sturdy, which makes for only 8.5 pounds of weight. In total, the ramps hold up to 6,000 pounds.
- Ideal for tires as wide as 8 inches
- The angle of approach of 16.7 degrees
- Easy maintenance
- Core material does not hold heat or cold and does not skid
Sample Customer Review. . . These things work like a champ! I was a bit leery of spending that much money just for a set of ramps, but I’m glad I did. When I received them I almost thought I had been sent the wrong thing by the weight of the box. I was blown away by how light these things are, and they are definitely tough! I’ve used them close to a dozen times now, with no issues whatsoever. The texture of them makes it easy for tires to grip when pulling a vehicle onto them. The handle on the back of each one makes it super easy to snatch up and move them wherever your heart desires. You could toss them on your roof if you want, no big deal! I haven’t put anything large on them like my F-250 but I have had multiple full-size and mid-size cars on them. If you need a new set of ramps, do yourself a favor and grab a set of these!Read more reviews on Amazon.com.
3. Trailer-Aid Tandem Tire Changing Ramp
This is an interesting ramp as it works well for all types of vehicles but it is specifically designed and suggested for trailers. Being said that, the ramps hold up to 15,000 pounds. Their key lies in its incredibly strong core made out of plumber.
Even if it was made for trailers, this does not mean it cannot be moved easily. On the contrary, it is easily portable and can be stored away even when traveling. It makes changing a tire or the oil an easy fit. It lifts up to 4 ½ inches in height which helps you work easily under your pick-up truck, trailer, or any other car.
- 4 ½ inch clearance
- Polymer core
Sample Customer Review. . . I was at a relative’s house not too long ago, and there was a guy there that was doing some demolition for them. I happened to notice that one of his trailer tires was really flat. I let him know, and when he started to remove the tire from the double axle trailer, he pulls this device out. I had never seen anything like it, but it made mounting or removing tires on double axle trailers a breeze. By pulling the trailer up and over this ramp and placing the good wheel in the notch, it keeps the trailer – loaded or not – stable and frees you up to remove the tire without a jack, or concern about the terrain.
I looked at the label on the product, googled it, and low and behold it is available on amazon. Ordered it on the spot. Having had a flat on a fully loaded trailer before, I appreciate the convenience and safety that the ramp provides. It does take up a little space, but I am planning to have a buddy weld a couple of pieces of angle iron on the very front of the trailer behind the hitch where this will fit perfectly and unobtrusively.Read more reviews on Amazon.com.
4. RhinoGear RhinoRamps
This set of ramps is of good quality, durability, and good construction at a reasonable price. They are a combination of rubber and heavy-duty plastic which is what gives them their longevity.
Both ramps are 35 inches long and reach 6.5 in height, making them tall enough for all types of vehicles. Their incline helps too, as it is 17 degrees. They hold up to 16,000 pounds, which makes them sturdy enough to hold the heaviest of cars.
- 17-degree incline
- Measurements: 10” W x 35” L x 6.5” H
- Made out of rubber and heavy-duty plastic
Sample Customer Review. . . I got these for several reasons: 1. lightweight, 2. they are low profile I own a steel heavy pair that have a steep incline and limit the types of cars that can drive up, 3. they stack together for simple storage which they stand up on 1 end so the footprint is about 2 square feet at most. I have parked pickup trucks to compact cars without issues. I am confident the ramps are built to last and worth every penny. Great for the oil change DIYer. I cannot find anything wrong with these yet and I would recommend them to everyone looking for a good set of ramps. My previous steel ramps would sink into the driveway on hot summer daysRead more reviews on Amazon.com.
5. RhinoGear RhinoRamps Vehicle Ramp
This brand is well known for its affordable price, weight capacity, durability, and overall structure and the ramps 11909ABMIs are also at the top of their game. They reach a maximum of 6.5 inches in height and 9 inches in width. With these measurements, they are perfect for smaller or low profile vehicles.
Their maximum weight capacity is 12,000 combined. Their rubber and high-density plastic make them highly durable and sturdy. Their 17-degree incline helps in the case of lower vehicles as it props them high enough to get the work done without any problem.
- Measurements: 9” W x 6.5” H
- 17-degree incline
Sample Customer Review. . . I have been using my friends’ RhinoRamps for years now and finally decided to buy a personal set. I did purchase 16K lb. capacity ramps vs 12K lb. since they were on sale, so these ramps are super strong from what I’ve seen. I have not got around to testing these on my truck but have tested these on multiple vehicles; Corolla, Accord, and an Avalon. I did a few measurements and weighed the ramps together to give you guys a better idea of the size of these things.Read more reviews on Amazon.com.
6. Camco Yellow Drive On Tri-Leveler
This particular ramp is well known for its Tri-leveler structure that allows you to raise your vehicle up to three different heights. This is a durable, non-slip ramp known for also being extremely lightweight. Depending on what you need, you can reach 3 inches, 7 inches, or 8 inches of height with this perfect routine maintenance ramp.
The resin which it is made of makes the ramp durable enough and resists up to 3,500 pounds combined. The non-slip surface makes it so that your tires will remain in place as you place your vehicle on the object. What makes this product so good, is its durability of both being a lightweight structure and sturdy enough to hold up to much weight.
- Durable resin
- Non-slip surface
- Built-in handle
Sample Customer Review. . . Was searching for some leveling blocks for my 31 ft. Motorhome, which does not have the leveling jacks, when I came across these. I kept reading reviews on the other types and saw too much about breakage. I purchased four of these so I would have plenty for either side or the rear four wheels. I have used them at three different RV campgrounds and absolutely love them. They are simple and easy to use. All you need is one other person to watch and make sure you do not pull completely over them. I merely set the RV where I wanted it, checked the level, pulled forward or back a couple of feet, and pulled back onto these levelers. Easy as that. No breaks or cracks so far.Read more reviews on Amazon.com.
7. Scepter Plastic Automotive Ramp
These are very affordable and sturdy ramps for your everyday needs. Extremely lightweight, which makes it amazing that they can hold up to 12,000 pounds together. The built form of the ramps can make it easy for all vehicles, but it’s specifically perfect for medium-sized sedans.
This is because the ramp is wide enough to hold up big sized wheels as the car goes up and down, and the textured surface makes it reliable as you roll up or go down. Another thing that helps is the combination of height and angle, which provides an easier way to maneuver your vehicle as you use the ramp.
The key lies in its parabolic arch, which distributes the weight and helps even the ground. The grid design is particularly perfect since all kinds of dirt, snow or water go through it making the surface non-skid and suitable for all types of weather and terrains.
- 12,000 weight limit
- Parabolic arch
- Grid design
Sample Customer Review. . . My car has the M-Sport package. The front bumper on the M package is a bit lower than the base model but this was not an issue even with the VERY low stock ground clearance. Stock tire size is 225/45/R18. I used these on a level grass surface. The car drove up just fine, with no throttle input, without wheel spin. This could be the X-drive system putting all the power to the back wheels because it senses the incline. I could clearly tell when both wheels are in position at the top. I did not need a spotter. Checked the ramps for integrity once the car was in the final position on top. I felt that these could be trusted. Despite the 6 inch lift that some were complaining about, it was enough that I could easily fit under the car to the oil plug. Used a catch pan also purchased on Amazon. This was a FAR cheaper alternative to buying a low-profile car jack with two proper stands and two BMW jack point adapters. I plan on using these in the future and will change my rating if I feel necessary. These have already paid for themselves doing just one oil change on this car so I don’t have anything negative to say after the first use.Read more reviews on Amazon.com.
8. Tomioka Racing Super Slopes – Car Ramps
If you have a low-profile vehicle this is the ramp for you. With this, you do not have to be worried every time you have to raise your vehicle since it takes into account the particular necessities of a vehicle close to the ground. It raises your car up to three inches off the ground, which does not compare to other ramps but it does provide enough space to work on the daily car maintenance procedures it could need. The winning feature of this ramp is its gentle slope.
While many ramps come with high inclines, this does not work for low profiled vehicles. It can damage the car as it goes up. With Tomioka, however, the gentle slope protects your car from any damage and leaves it so that it is easy to ride it up and down.
It is made of plastic, which attributes to how lightweight it is and easy to carry around. But do not let this fool you. The material is sturdy and strong enough to be highly durable and keep the form under heavyweight.
- Designed specifically for low profile vehicles
- Superior grip
- Made out of heavy-duty plastic
Sample Customer Review. . . I love these. You wouldn’t think 2.5” would make a difference, but it does. I use them all the time. Super easy to do with no assistance. Like others have said, it’s hard to tell when the car is all the way on, but the angle is so small that you can easily e-brake it and check. I’m planning to buy a second set so I can put all four wheels on them any time I do maintenance. They’re narrow, but that doesn’t matter. They are wide enough.Read more reviews on Amazon.com.
9. Nicky Nice Solid Steel Auto Ramp Set
Made out of solid steel, the Nicky Nice car ramp set is perfect for anyone looking for durability. The built in holes are also included for added traction. With this set of ramps, you will feel much more rest assured when using them on your car.
At eight inches tall, this allows more than enough space to work on your car.
Sample Customer Review. . . I used these for my 2017 Honda CR-V and 2015 Chevrolet Cruze and you can feel rest assured that crawling under your vehicle while rolled under these ramps that you are safe. The ramps are solidly built of steel and have a raised lip at the end of the hardware so that you know when to stop accelerating your car. Also, they have holes on the incline part to provide bonus traction for your tires to prevent vehicle slippage. 1/4″ holes are punched out on each ramp so that they can be hung up for storage, also they are stackable.Read more reviews on Amazon.com.
10. Pyle Heavy Duty Plastic Curb Ramps
Your first thought may be that plastic isn’t the best choice for a car ramp but with these Pyle ramps, that’s far from the truth. Durability-wise, these ramps can hold over 6000 pounds. Feeling these would break should be the least of your worries.
At about a four inch height, these will be able to get the job done!
Sample Customer Review. . . I bought these to move my motor scooter (roughly 200 pounds) in and out of my house & yard: each has about a 4-5 inch step up, making rolling the scooter into either space a challenge. These are light enough for even a weakling like me to toss them around one-handed, but easily hold up to the weight of the scooter and sometimes mine as well. Made it a snap to roll the scooter in and out, which is what I needed.Read more reviews on Amazon.com.
It is important to consider before buying any ramp some details like duration, length, height, and materials. Like persons, vehicles have their special requirements, and a ramp that does not fit them won’t work. Length and width are important.
If you’re going to be using it for bigger cars, like SUVs, trailers, pick-up trucks, etc. you will need to go for ramps on the wider and longer side. Similarly, if you’re going to be using it for smaller cars like sports cars, you can consider buying smaller ramps. This also goes with heights and angles of degree. Ramps that are too high can damage a low profile vehicle. Please make sure to check your car’s profile before buying anything that could end up in a disaster.
One should also consider the materials and the duration that each of the ramps represents. Ramps can be made of plastic, metal, or other more detailed cores like polymer. Plastic cores are less expensive, and if industrial they are relatively strong and durable.
On the scale, metal is the most effective and the longest to last without dents or any other problem. But in order for these ramps to work, you have to take into a context where you will be using them and how much they will be used.
If you’re going to buy a ramp that is going to be used almost 24/7, then we suggest you learn more about the metal types. Unless you are in a place where weather can be unpredictable or live close to the sea which can corrode it faster. With these little details in check, you will be all set for the purchase.
Now you know which ramps are better for you based on the type of vehicles and needs you may have. We hope this article helps you choose among the different types of ramps we have provided based on common needs from the customers.
It is important to remember before purchasing anything, to always check for what your car truly needs. Not all ramps work for all types of height, and different materials mean different resistances to the terrains. We know there are a lot of details to remember, but the best purchases come from the smartest choices.
Are car ramps safe?
As long as you follow the usage instructions you have nothing to worry about. They are there to ensure the user's and the car's safety. You should also ensure that you are using the proper car ramps for the weight of your vehicle and if they are recommended for the surface on which they stand.
What are the differences between a car ramp and a jack stand?
Car ramps are platforms on which you can load your car on. This happens by driving the car onto the structure while aligning the wheels so that it can be properly lifted.
Jack Stands, on the other hand, are a tripod-shape tool, and it's designed to support the weight of your vehicle by being suspended.
What can you do with car ramps?
You can use car ramps for a plethora of things. Oil changes, general maintenance, small repairs, and underbody inspections are the most common usage for the ramps. Some ramps even come specialized for changing the wheels on specific vehicles, like trailers. Then, there are car ramps versatile enough to load and unload wheelchairs, scooters, bikes, and other smaller vehicles.
How long do car ramps last?
They can last a lifetime if they count with the right usage and proper maintenance. In the events of heavy usage, then their life span is shortened. For those occasions, some ramps are made with high-impact plastic or high-density foam for longer durability. You can also consider metallic ramps if you must use them almost all the time.