Different Types of Hammers

Different Types of Hammers 

Different types of hammers are extremely specialized and can fulfill jobs previously performed by axes. Other varieties are more adaptable and may be found in any workshop.

There are three basic components: the head, which you use to hit objects with; the handle, which gives different amounts of swing or improved precision; and the back half of the hammer head, which may contain a hook, peen, or claw.

Ball Peen Hammer

This hammer has a high rounded end and is typically used for smoothing the edges of metal pins, fasteners, and other similar items. As a result, it is generally utilized by engineers. However, some homeowners find it handy as well. Because of this, it is also known as a machinist’s hammer.

Claw Hammer 

Perhaps the most iconic of all hammers, a claw hammer has a curved, forked claw that can hold nail heads, allowing the operator to push out nails. This hammer is so flexible that it may be found in any house or workshop.

Club Hammer 

This hammer, which resembles a sledgehammer, is also known as a lump or a drilling hammer. It is commonly used for light demolition work and driving masonry heads and steel chisels. This hammer style typically weighs approximately three pounds; however, some are significantly heavier. The two faces and the handle, on the other hand, are substantially smaller. The handles might be constructed of wood or a material that absorbs vibrations.

Bend Blow Hammer

Although this is essentially an everyday hammer that you’ve undoubtedly seen before, it is one of the unusual hammers in this portion of the list. This hammer is designed to generate enough power to release pieces and repair dents without destroying the workpiece. It is typically utilized in woodworking and automotive applications. 

Framing Hammer 

The Framing hammer features a straight claw and a waffled head, similar to a claw hammer. It gets its name from its principal purpose: house frame assembly. This coating on the hammerhead decreases slippage while striking the nails. It also leaves a mark on the wood, which is no longer visible when the frame is finished.

Rubber Mallet 

These are among the most often used mallets. It features a rubber head that allows it to deliver milder strikes. It’s also gentle enough to slide plasterboard into position without damaging it. It may be used on sheet metal, upholstery, and various woodworking projects.

Sledge Hammer 

A sledgehammer is comparable to a club hammer but considerably more significant. The handle is longer and heavier, frequently weighing as much as 15 pounds. If you want to utilize a sledgehammer, swing it like an ax. A sledgehammer is often used for demolition, but it may also help drive stakes into the ground, such as installing a fence.

Tack Hammer 

It is indeed a hammer that has a very distinct appearance. It has two claw-like heads. One is generally magnetized. The magnetic end keeps the tack in place while the other end forces it into position. It is used to drive approaches during upholstery repair.

Blocking Hammer 

A blocking hammer is widely employed by blacksmiths, with a flat, square head on one side and a cylinder head on the other. It may be used for shaping metal on a block or anvil. 

Brass Hammer

Brass hammers feature a thin, cylindrical double-head that is used to pound steel pins without injuring the surface. It is accessible in both auto and carpentry operations.

Brick Hammer 

The claw of a bricklayer’s hammer doubles as a chisel for scoring, while the narrow head is capable of splitting bricks, making the hammer very useful in bricklaying and masonry projects. They are also referred to as masonry hammers.

Bushing Hammer

The bushing hammer is an unusual-looking hammer that appears to be comparable to something you may use in your kitchen to tenderize meat. A tool like this is mostly used for masonry work, such as adding texture to a hardscaping job. It would make the stone’s surface rougher and more visually beautiful or make a stone walkway less slippery. The hammer can be portable or electronic and come in various forms and sizes.

Cross Peen Hammer 

This hammer’s wedge-like peen is horizontally oriented. It may be used to place panel pins or tacks without risking damaging your fingertips. It is also used to shape metal. The head has a wedge form on one side and a cylindrical shape on the other. This tool is used by blacksmiths for riveting and forging.

Cross Pein Pin Hammer

This instrument, a lighter version of the cross peen hammer, is not suitable for metallurgy. Instead, it’s best suited for cabinetry, golden joinery, and other woodworking projects.

Chasing Hammer 

Chasing hammers feature a polished steelhead with a rounded head. This head is generally used for peening and flattening metal. It also features a much smaller ball-peen than a typical ball-peen hammer, which could be used to rivet. The handle has an odd design in that it is narrow towards the hammer end yet bulbous at the other. The chasing hammer is suitable for metalworking, but it is especially beneficial for producing jewelry. 

Different Types of Hammers: Conclusion 

Hammers may be a significant investment, but with so many options available, it’s vital choosing the correct one for particular purposes. Users can appreciate what to search for now that they know a bit more about their possibilities.

Written by: Jessica Santos

Leave a Comment

Your email address will not be published.